Difference between revisions of "GPL Controller Setup"
| Line 11: | Line 11: | ||
[[File:Controller3.jpg]] | [[File:Controller3.jpg]] | ||
| + | |||
| + | |||
| + | [ Hack ] | ||
| + | steer_ratio=1 ; Speed sensitive steering ratio below 60 MPH | ||
| + | ; Allows sharper turns at low speeds. | ||
| + | ; 0 = No 1 = Yes * | ||
| + | |||
| + | [ Joy ] | ||
| + | allow_force_feedback = 1 ; Use FF if device has it 0 = No * 1 = Yes | ||
| + | force_feedback_damping = 40.0000000 ; force feedback damping coefficient - Default = 40.0 | ||
| + | force_feedback_latency = 0.0850000 ; force feedback latency (secs) - Default = 0.085 0.0040000 | ||
| + | max_steering_torque = 225.000000 ; steering torque in N*in giving max device force - Default = 225.0 | ||
| + | ;FFB steer vibe freq mult = 0.2000000 | ||
[[File:Controller4.jpg]] | [[File:Controller4.jpg]] | ||
Revision as of 23:18, 19 April 2009
Setting up your controller (wheels and pedals) is extremely important and unfortunately, it can be more of an art than a science. So the thing to do is to start with something conventional and then tweak to your individual hardware and personal preferences.
[ Hack ]
steer_ratio=1 ; Speed sensitive steering ratio below 60 MPH
; Allows sharper turns at low speeds.
; 0 = No 1 = Yes *
[ Joy ] allow_force_feedback = 1 ; Use FF if device has it 0 = No * 1 = Yes force_feedback_damping = 40.0000000 ; force feedback damping coefficient - Default = 40.0 force_feedback_latency = 0.0850000 ; force feedback latency (secs) - Default = 0.085 0.0040000 max_steering_torque = 225.000000 ; steering torque in N*in giving max device force - Default = 225.0 ;FFB steer vibe freq mult = 0.2000000
